832 Series Two-Part Black Epoxy, 3 Liters
Hisco #:832B-3L-33018
MFG #:832B-3L
$
Manufacturer Estimated Lead Time When Not In Stock: 13 days
Minimum Order QTY: 1
Item must be ordered in multiples of 1
Item must be ordered in multiples of 1
This item is hazardous and may be subject to an additional handling fee.
The MG Chemicals 832B-3L is a Series 832 epoxy adhesive with a mix ratio of 2.3:1.
The MG Chemicals 832B-3L Features:- Non-porous, water and chemical resistant
- Extremely impact resistant (contains a form of nylon)
- Colored black, to prevent visual inspection
- Affords high security, once cured, extremely difficult to remove
- Non-conductive, an electrical insulator
- Low toxicity
- Easy and simple to mix
- Long pot life
- Can be cured in one hour at 65°C (150°F)
- This product is RoHS compliant
- Series: 832
- Product Type: Epoxy Adhesive
- Hardness: 80 to 82Shore D
- Material Compatibility: Aluminum, Steel, Fiberglass, Wood, Glass, Polycarbonate, Acrylic, Polypropylene
- Color: Part A:Black Part B:Clear/Amber
- Primary Color: Part A:Black Part B:Clear/Amber
- Mix Ratio: 2.3:1
- Physical Form: Liquid
- Cure Time: 35min
- Viscosity Measurement: Part A:1800 mm²/s Part B:8400 cSt
- Shelf Life: ≥3yr
- Chemical Composition: Part A:Bisphenol-A Epoxy Resin (reaction Product), Alkyl Glycidyl Ether, Carbon Black Part B:Fatty Acids, C18-Unsatd., Dimers, Reaction Products With Polyethylenepolyamines, Triethylenetetramine
- Specific Gravity: Part A:1.23 Part B:0.96
- VOCs Content: 23g/L
- Odor: Part A:Mild Part B:Musty
- Cure Type: Oven 212°F
- Dielectric Strength: 472V/mil
- Elongation at Break: 3.3%
- Tensile Strength: 8250lb/in²
- Maximum Operating Temperature: +294°F
- Minimum Operating Temperature: -22°F
- Container Capacity: 0.8gal
- Applications: Pot or Encapsulate Printed Circuit Assemblies, Automobile, Marine, Aerospace, Aviation, Communication, Instrumentation, Industrial Control Equipment
Product Description
Technical Information
SDS/TDS
Back to top
Product Description
This item is hazardous and may be subject to an additional handling fee.
The MG Chemicals 832B-3L is a Series 832 epoxy adhesive with a mix ratio of 2.3:1.
The MG Chemicals 832B-3L Features:- Non-porous, water and chemical resistant
- Extremely impact resistant (contains a form of nylon)
- Colored black, to prevent visual inspection
- Affords high security, once cured, extremely difficult to remove
- Non-conductive, an electrical insulator
- Low toxicity
- Easy and simple to mix
- Long pot life
- Can be cured in one hour at 65°C (150°F)
- This product is RoHS compliant
- Series: 832
- Product Type: Epoxy Adhesive
- Hardness: 80 to 82Shore D
- Material Compatibility: Aluminum, Steel, Fiberglass, Wood, Glass, Polycarbonate, Acrylic, Polypropylene
- Color: Part A:Black Part B:Clear/Amber
- Primary Color: Part A:Black Part B:Clear/Amber
- Mix Ratio: 2.3:1
- Physical Form: Liquid
- Cure Time: 35min
- Viscosity Measurement: Part A:1800 mm²/s Part B:8400 cSt
- Shelf Life: ≥3yr
- Chemical Composition: Part A:Bisphenol-A Epoxy Resin (reaction Product), Alkyl Glycidyl Ether, Carbon Black Part B:Fatty Acids, C18-Unsatd., Dimers, Reaction Products With Polyethylenepolyamines, Triethylenetetramine
- Specific Gravity: Part A:1.23 Part B:0.96
- VOCs Content: 23g/L
- Odor: Part A:Mild Part B:Musty
- Cure Type: Oven 212°F
- Dielectric Strength: 472V/mil
- Elongation at Break: 3.3%
- Tensile Strength: 8250lb/in²
- Maximum Operating Temperature: +294°F
- Minimum Operating Temperature: -22°F
- Container Capacity: 0.8gal
- Applications: Pot or Encapsulate Printed Circuit Assemblies, Automobile, Marine, Aerospace, Aviation, Communication, Instrumentation, Industrial Control Equipment
Technical Information
Brand: MG Chemicals
Availability: In Stock
Weight: 8
Country Of Origin: CA
Harmonized Code: 3907.30.0000
UPC Code: 779008832301
$
Minimum Order QTY: 1
Item must be ordered in multiples of 1
Item must be ordered in multiples of 1