US_HISCO_SPIRE

EXTENDED FOR A LIMITED TIME: 10% Off Solder Wire & Bars on orders over $500 – Online Only Until 11/15 – Use Code SOLDER10

Dow

Sylgard® 182 Part A/B Fast Cure Silicone Elastomer Kit, 1.1 lb Kit

Hisco #:DC182P-28765

MFG #:DC182P

$
Manufacturer Estimated Lead Time When Not In Stock29 days
Minimum Order QTY: 1
Item must be ordered in multiples of 1

The Dow DC182P is a Series 182 silicone elastomer with a mix ratio of 10:1.

The Dow DC182P Features:
  • No exotherm during cure
  • No solvents or cure byproducts
  • Deep section cure
  • Repairable
  • Good dielectric properties
  • Flexible elastomer
The Dow DC182P Specifications:
  • Brand: Sylgard®
  • Series: 182
  • Product Type: Silicone Elastomer
  • Color: Colorless
  • Primary Color: Colorless
  • Density: 1.03g/cm³
  • Mix Ratio: 10:1
  • Flash Point: Part A:>100 Part B:>101.1°C
  • Physical Form: Liquid
  • Cure Time: 336h
  • Viscosity Measurement: 4575mPa/s
  • Shelf Life: 24month
  • Chemical Composition: Part A:Dimethylvinylated And Trimethylated Silica, Tetra(Trimethylsiloxy)Silane
  • Specific Gravity: 1.03
  • Dielectric Strength: 19V/mil
  • Product Material: Silicone
  • Material Category: Plastic
  • Thermal Conductivity: 0.16W/m.K
  • Odor: Very Little
  • Maximum Operating Temperature: +392°F
  • Minimum Operating Temperature: -49°F
  • Container Capacity: 1.1lb
  • Container Type: Kit
  • Applications: General Potting, Power Supplies, Connectors, Sensors, Industrial Controls, Transformers, Amplifiers, High Voltage Resistor Packs, Relays, Adhesive/Encapsulant for Solar Cells, Adhesive Handling Beam Lead Integrated, Circuits During Processing

Product Description

The Dow DC182P is a Series 182 silicone elastomer with a mix ratio of 10:1.

The Dow DC182P Features:
  • No exotherm during cure
  • No solvents or cure byproducts
  • Deep section cure
  • Repairable
  • Good dielectric properties
  • Flexible elastomer
The Dow DC182P Specifications:
  • Brand: Sylgard®
  • Series: 182
  • Product Type: Silicone Elastomer
  • Color: Colorless
  • Primary Color: Colorless
  • Density: 1.03g/cm³
  • Mix Ratio: 10:1
  • Flash Point: Part A:>100 Part B:>101.1°C
  • Physical Form: Liquid
  • Cure Time: 336h
  • Viscosity Measurement: 4575mPa/s
  • Shelf Life: 24month
  • Chemical Composition: Part A:Dimethylvinylated And Trimethylated Silica, Tetra(Trimethylsiloxy)Silane
  • Specific Gravity: 1.03
  • Dielectric Strength: 19V/mil
  • Product Material: Silicone
  • Material Category: Plastic
  • Thermal Conductivity: 0.16W/m.K
  • Odor: Very Little
  • Maximum Operating Temperature: +392°F
  • Minimum Operating Temperature: -49°F
  • Container Capacity: 1.1lb
  • Container Type: Kit
  • Applications: General Potting, Power Supplies, Connectors, Sensors, Industrial Controls, Transformers, Amplifiers, High Voltage Resistor Packs, Relays, Adhesive/Encapsulant for Solar Cells, Adhesive Handling Beam Lead Integrated, Circuits During Processing

Technical Information

BrandDow
AvailabilityIn Stock
Weight: 1

Additional Resources

$
 
Minimum Order QTY: 1
Item must be ordered in multiples of 1