Low VOC Dissipative Floor Finish, 1 Gallon
Hisco #:10514-15062
MFG #:10514
Item must be ordered in multiples of 1
The Desco 10514 is a statguard low-voc dissipative floor finish that will transform a non ESD flooring to an ESD protective floor and is listed slip resistant. The Low-VOC floor finish allows the treated floor to act as a theoretical charge resevoir or natural ground. The capacitance and surface resistant of Statguard floor finish treated floors will decay 5000 volt charge to 0 in less than 0.1 seconds when tested to federal test Method standard 101C, Method 4046.
Desco 10514 Features:- UL Listed for slip resistance tested by underwriters laboratory to their slip resistance standards to ensure employee safety and to mitigate users liability exposure
- Resists wear in order to maintain ESD performance longer
- Used to convert hard non-ESD floors to ESD protective flooring and for use in protecting and enhancing ESD permanent flooring (vinyl, VCT, rubber)
- 23% solids-2 coat systems, reduces labor needed for inital install and on going maintenanceof the floor
- Lead-Free RoHS compliant
- Product Type: Dissipative Floor Finish
- Container Size: 1 Gallon
- Chemical: Diethylene Glycol Monoethyl Ether
- Physical Form: Liquid
- Standards Met: ANSI/ESD S40.40
- Specification number three goes here
Product Description
The Desco 10514 is a statguard low-voc dissipative floor finish that will transform a non ESD flooring to an ESD protective floor and is listed slip resistant. The Low-VOC floor finish allows the treated floor to act as a theoretical charge resevoir or natural ground. The capacitance and surface resistant of Statguard floor finish treated floors will decay 5000 volt charge to 0 in less than 0.1 seconds when tested to federal test Method standard 101C, Method 4046.
Desco 10514 Features:- UL Listed for slip resistance tested by underwriters laboratory to their slip resistance standards to ensure employee safety and to mitigate users liability exposure
- Resists wear in order to maintain ESD performance longer
- Used to convert hard non-ESD floors to ESD protective flooring and for use in protecting and enhancing ESD permanent flooring (vinyl, VCT, rubber)
- 23% solids-2 coat systems, reduces labor needed for inital install and on going maintenanceof the floor
- Lead-Free RoHS compliant
- Product Type: Dissipative Floor Finish
- Container Size: 1 Gallon
- Chemical: Diethylene Glycol Monoethyl Ether
- Physical Form: Liquid
- Standards Met: ANSI/ESD S40.40
- Specification number three goes here
Technical Information
Item must be ordered in multiples of 1