Kelvin Probes Pistol Grip 10 ft 25A, Spring Loaded Replacement for Cat #2118.75
Hisco #:2118-84-65661
MFG #:2118.84
Item must be ordered in multiples of 1
- 25A rated, set of 2
- Lead length: 10.33-ft (3.15m)
- Maximum Voltage: 300V CAT III
- Designed for use with AEMC Micro-ohmmeters 6240 and 6255 or equivalent
- Spaded lugs for diameters from .157 to .236 inches (4 to 6 mm)
The AEMC 2118.84 pistol-grip spring loaded 25 A test probes can measure low resistances very accurately using micro-ohmmeters with .157-to-.236-inch (4 to 6 mm) diameter binding posts or .157-inch (4 mm) diameter safety terminals. The pistol-grip spring loaded test probes ensure good contact at the measurement point even if the surface is uneven. Each 25 A test probe has very low resistance. The measurement is made in 4-wire mode, so lead resistance compensation is not necessary.
In The Box
- 2118.84 Test Probes, 10 ft (2)
Product Description
- 25A rated, set of 2
- Lead length: 10.33-ft (3.15m)
- Maximum Voltage: 300V CAT III
- Designed for use with AEMC Micro-ohmmeters 6240 and 6255 or equivalent
- Spaded lugs for diameters from .157 to .236 inches (4 to 6 mm)
The AEMC 2118.84 pistol-grip spring loaded 25 A test probes can measure low resistances very accurately using micro-ohmmeters with .157-to-.236-inch (4 to 6 mm) diameter binding posts or .157-inch (4 mm) diameter safety terminals. The pistol-grip spring loaded test probes ensure good contact at the measurement point even if the surface is uneven. Each 25 A test probe has very low resistance. The measurement is made in 4-wire mode, so lead resistance compensation is not necessary.
In The Box
- 2118.84 Test Probes, 10 ft (2)
Technical Information
Item must be ordered in multiples of 1